When Oklahoma weather knocks out the grid, the first question most homeowners ask is simple: what size generator do I actually need? The honest answer is that square footage alone won't tell you — sizing a standby generator is about the electrical load you want to cover, not the size of your house.
Whole-house vs. essential-circuit backup
There are two practical approaches to home backup power:
- Essential-circuit coverage keeps the things that matter most running: refrigerator, lights, internet, sump pump, furnace blower, and selected outlets. This is the most common starting point for Tulsa-area homes.
- Whole-house coverage aims to run nearly everything, including central air conditioning. Whether that's possible depends on your home's total electrical load and whether load management is part of the setup.
A permanently installed standby generator starts automatically when the power goes out — even when you're not home. No extension cords, no hauling gasoline in a storm.
Why load calculations beat guesswork
The biggest sizing mistake is guessing. A proper assessment looks at:
- Your electrical panel — available capacity and how circuits are organized.
- Running loads — what each appliance or circuit draws while operating.
- Motor starting loads — compressors and motors (like your AC) draw a surge of power when they start, often several times their running load. This is usually the number that decides generator size.
An on-site load calculation matches the generator, transfer switch, and any load management to what you actually want to run — not a generic chart.
Natural gas or propane?
Home standby generators don't use gasoline. In Green Country, the two real options are:
- Natural gas — runs off your existing gas service, so there's no refueling. But your meter and gas piping must be able to supply enough fuel; some homes need upgrades.
- Propane (LP) — a tank on your property provides stored fuel. Tank size, placement, consumption rate, and refill planning all matter, and generator output can differ between fuel types.
What installation actually involves
A standby generator installation is more than dropping a unit on a pad. It typically includes a site visit and load calculation, a written proposal, electrical and gas permits, a code-compliant pad and fuel connection, a transfer switch installed by a licensed electrician, and a start-up walkthrough. Placement has to meet manufacturer clearances for windows, doors, and air intakes.
American Home Pros is an authorized Generac dealer, and our trusted electrician partners handle the licensed electrical work — including the transfer switch that keeps generator power safely separated from utility lines.
Get a real number, not a guess
Every home is different, so the only useful price is a site-specific written proposal. Generator capacity, fuel type, distance to your gas supply and panel, site conditions, and permit fees all affect the final cost.
Ready to find out what your home needs? Request a free Generac generator installation consultation or call (539) 500-1776. We serve Tulsa and Green Country communities — check our service area to confirm your city.